This all looks like refind only accepts the last definition of initrd overwriting the previous rather than adding these two. What if the two initrd files are defined in the options line instead of the main part of the stanza? solvedintel-ucode using refind and manual stanzas. Remember that if you are doing a re- install to clean up your old kernel / initramfs files on the internal EFI partition. Should you be installing on the internal e. MMC you are good to go, this bug doesn't affect you.

Note: As of refind-efi 0.6.5-1, refind can auto-detect kernels in /boot, if there are UEFI drivers for the filesystem used by /boot partition (or / partition if no separate /boot is used) in the ESP, and are loaded by rEFInd. To enable rEFInd to detect and load the drivers and /boot kernels you must enable the appropriate options in refind.conf ( mainly mention the PATH for the drivers location in the ESP) and also copy your refind_linux.conf to /boot/refind_linux.conf.

So, I assume, you have to copy the ext4 drivers to your ESP and uncomment the line. Hello, I am trying to setup rEFInd to work with kernels I have installed (core and mainline). I am getting error Error: Not Found While Loading vmllinuz-linux. That error indicates that the file vmlinuz-linux isn't present. Chances are this was generated by your manual boot stanza, which as written requires that the file /boot/vmlinuz-linux be installed on a volume called UEFISYS. Assuming that name is descriptive, this is presumably your ESP, but no such file is present on the ESP. More broadly speaking, you're at least partially set up for two methods of launching Linux, but I suspect that both of these methods is missing at least one critical element: • Manual boot stanzas -- As noted, your current manual boot stanzas refer to files on the UEFISYS volume, but they don't seem to be present (assuming 'UEFISYS' is your ESP).

You must either copy your kernel and initrd files or specify your root or /boot partition on the 'volume' line (and adjust the path if you've got a separate /boot partition). • Auto-detection -- rEFInd scans certain locations for boot loaders, including the root (/) directory and the /boot directory of every volume it can read. Allj Slots 2 2 Crack Rocks. Thus, it should pick up a Linux kernel in its natural 'home' if the EFI can read the appropriate filesystem. This conditional is critical.

Sony flash tool firmware not show. From Flashtool/drivers folder extract the zip file XXXADBdriver which corresponds to your phone model. Open “Device manager” on the computer and find the device which is with an exclamation mark on it (do this with connected to the computer phone) Right click on the device and choose Uptade driver.

The Refind Binary File Is Missing Aborting Installation Definition. Macpro Refind Ubuntu installation error. Isn't there some kind of installation. The Refind Binary File Is Missing Aborting Installation Software. I have installed the rEFInd directory to /boot/efi/EFI/refind and it contains the refind.

If your kernel is on an ext4 filesystem, for instance, the EFI can't read it unless you install rEFInd's ext4fs driver. My guess is that you haven't installed such a driver, and so auto-detection is not picking up your kernels and you're only seeing entries for your manual boot stanzas. Installing a suitable filesystem driver will change this if your kernels are in a standard partition (not a RAID or LVM setup) that uses ext2/3/4fs, ReiserFS, or HFS+. In most cases, auto-detection is preferable because it picks up new kernels automatically; however, given the usual Arch naming scheme, either method works. Since rEFInd defaults to doing auto-detection, it's probably still just a little easier to set up, though. In either case, you need to ensure that rEFInd can read the filesystem on which the kernel is stored. You can do this by using drivers or by copying the kernel to the ESP.

The latter is easier if you mount the ESP at /boot; but if you're not currently set up that way, you'll need to juggle some files to get that to work. Sorry for hijacking this thread a little bit, but how do I tell rEFInd to use the 'Arch' logo on bootup if I switch to auto-detection?

Background: Out of curiosity I have set my system for auto-detection. Free Pat Files For Revitalift. This means: - I have deleted /boot/efi/EFI/arch and moved refind_linux.conf to /boot - I have created a directory /boot/efi/EFI/tools/drivers_x64 and copied the relevant drivers from /usr/lib/refind/drivers_x64 - I have uncommented the 'scan_drivers_dir' line in refind.conf to look for drivers in /EFI/tools/drivers_x64 After a reboot rEFInd shows me now the penguin image as boot option. But I would like to use the Arch logo. How do I tell rEFInd to use it?

Ah, and by the way - do I have to change the nvram entry for rEFInd?